¶ Replacement of front roller
¶ Video Guide
Click to JumpReplacement of front roller Video Guide
¶ Operation Guide
1. Shut off the power first, Refer to the IR3 V2 Installation Video Guide. Remove the upper frame
2. Refer to the IR3 V2 Replace the conveyor belt Video Guide. Remove the conveyor belt
3. Turn the cover to the back side and unscrew all 8 screws on the case cover.
4. Then remove the computer case cover. When doing so, first disconnect the wires of the fans that are still connected at the bottom.
5. Remove the wire terminals of the front roller, and then loosen the six screws of the two front guard corners.
6. Remove the roller and insert the new one.
7. Tighten the two screws on the upper and lower parts of the guard corners, and insert a little bit in the middle to ensure they won't come off.
8. Insert the fan terminal back onto the cover of the case, close the case cover and lock the 8 screws back in place.
9. Refer to the above video tutorial to reinstall the conveyor belt and the upper frame, then re-level them.